SILICONE EDGE GRAPHICS
FabriFrame™ is a revolutionary fabric tension system which is so versatile the creative possibilities are huge. It can be mounted onto walls, doors or ceilings with a fabric graphic applied to the face, or be a free standing unit or partition wall, with a single or even a double facing fabric graphic.
The system is created from a lightweight aluminium frame which can be fitted on-site by our installation team or, depending on size, sent as a flat pack unit for you to assemble yourself.
The frames comes in a variety of profile depths ranging from 20mm to 100mm, with the ability to be cut and finished to create almost any shape you can imagine.
FABRIFRAME™ FEATURES
Custom sizes and profile depths:
The frames systems are made custom with many profile depths to accommodate your lighting option. They can be freestanding, cover entire walls and ceilings or several smaller sections.
Printable:
We print the fabric using a dye sublimation technique to produce vibrant, crisp images which create maximum impact.
Replaceable:
FabriFrame™ graphics can be replaced and updated if required which allows the panels to be used for illuminated marketing messages, brand awareness or sell advertising space.
Installation:
Our qualified team carry out a site survey to evaluate the area and then install the system at a time convenient to you.
EXAMPLES
TYPES OF FABRIC
Sector:
Products used:
Our preferred fabric for the FabriFrame™ system is a 215 gsm (+3%), 100% polyester substrate which is available in widths of 3200mm. It has been finished with INKTeX+BS® for direct print with diverse inks with flame retardant treatment. This fabric has been classified as DIN 4102-B1 and EN13501.
The FabriFrame™ light-block fabric is suitable for when external lighting may effect the graphic from behind. This is a 100% polyester with a black rear coating. At approximately 235 gsm (+3%) it is available at 3000mm width. It has been finished with INKTeX+BS® for direct print with diverse inks with flame retardant treatment. This fabric has been classified as DIN 4102-B1 and EN13501.
TYPES OF FRAME
Sector:
Products used:
The sturdy, lightweight aluminium frame is made from 6063 T6 aluminium.
The FabriFrame frame system is available in a range of depths and colours. The frame is available in black, white or aluminium as standard, but can be powder-coated to a specific RAL is required. It is also available in different depths and even a double-sided option for freestanding or hanging frames. These range from 19mm through to 140mm. The FabriFrame™ aluminium frame can be fabricated as one large frame, several connecting frames, a free-standing unit or a full wall/ceiling covering.
Get in touch for more details because out frame profiles can be custom made and even fabricated to create bespoke curves or angles.
SETTING UP ARTWORK FOR SILICONE EDGE GRAPHICS
Sector:
Products used:
If you or your studio team are setting up artwork for a FabriFrame, then there are a few things to note before sending us your high-resolution PDF. Our full artwork guidelines can be found here.
BLEED: When fabric is printed and the colour is sealed there is usually a shrinkage of approximately 1-2%. Therefore it is important that if you are providing artwork for a FabriFrame™ system, you allow at least 25mm bleed.
CROP MARKS: Please don’t add crop marks or tick marks. If you do, we’ll have to remove them. Our rip software allows us to differentiate between the art-board and the bleed, so we’ll know where to cut the fabric.
SAFE AREA: Shrinkage and the nature of fabric means it’s difficult to be pinpoint accurate. So please leave a safe area of at least 50mm from the edge of the artwork and start of the bleed area.
APPLICATIONS
- Leisure centres
- Colleges and universities
- Retail stores
- Offices
- Bars cafes and restaurants
- Hotel and hospitality
BENEFITS
- Premium feel and superior to a banner stand system
- Durable and lightweight framework
- Flame retardant fabrics
- No need to bring back the system for new graphics, we'll just post you a new fabric
- Easily replaced when they need to be updated with a new message or image.
- Ideal for rollouts
WE LOVE BIG IDEAS AND WE’D LOVE TO HEAR YOURS
"*" indicates required fields
look like an image without the frame
Choose our silicone edge graphics for your next seasonal campaign. Designed to look like an image without the frame, this environmentally-friendly option will look seamless in your space. We print your design onto our Eco Fabric – made from 100% recycled bottles – and display it in our aluminium frames. When you need to swap out your messaging, you can recycle your printed Eco Fabric and fix a new graphic into your frame. That means less waste ending up in landfill.
different shapes and sizes
Our silicone edge graphics come in all different shapes and sizes, so we can recommend one that suits your space. We can cut our aluminium frames into any shape and size you need. We can even come and survey your space to recommend what’s best. You won’t be limited when it comes to design options either. We’ll take care of everything at our in-house printing facility – from concept to print. And we can come and install your new silicone edge graphic too.